This release note and the software that accompanies it are copyright (c) 2011, Intel Corporation or its suppliers, and may only be installed and used in accordance with the license that accompanies the software.
This Software is furnished under license and may only be used or copied in accordance with the terms of that license. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. The Software is subject to change without notice, and should not be construed as a commitment by Intel Corporation or its suppliers to market, license, sell or support any product or technology. Unless otherwise provided for in the license under which this Software is provided, the Software is provided AS IS, with no warranties of any kind, express or implied. Except as expressly permitted by the Software license, neither Intel Corporation nor its suppliers assumes any responsibility or liability for any errors or inaccuracies that may appear herein. Except as expressly permitted by the Software license, no part of the Software may be reproduced, stored in a retrieval system, transmitted in any form, or distributed by any means without the express written consent of Intel Corporation. 

==========================
Supported RAID Controllers
==========================
This download supports SGXPCIESAS-R-EXT-Z, SGXPCIESAS-R-INT-Z and X4620A Sun Blade RAID 5 Expansion Module, please verify that this package has been tested with the RAID card you have chosen to use by checking the drivers web page for your controller at http://support.intel.com.

===================
Package Information
===================
Version = 5.2.0-17757
Supported OS = Windows Windows 2003 x86, x64, and Windows 2008 x86, x64, and Windows 2008 R2 x86, x64

==================
Known Restrictions
==================
N/A

=======================
Contents on the package
=======================
Windows 2003 x86, x64 and Windows 2008 x86, x64, and Windows 2008 R2 x86, x64 device driver 
	adpenc.cat
	adpenc.inf
	arc.cat
	arc.inf
	arc.sys
	arcsas.cat
	arcsas.inf
	arcsas.sys
	raidisk1
	txtsetup.oem
	License_v2.pdf
	WHQL.txt

================================
Usage/Installation Instructions:
================================
To Install the Driver With the Windows OS onto a Bootable Array
	Note: You will need the Windows Installation media to complete this task.
1. Insert the Windows installation medium, then restart the computer.
2. Follow the on-screen instructions to begin the Windows installation.
3. When prompted to install a third-party driver, press F6.
	Note: When F6 is active, a prompt is displayed at the bottom of the screen for only 5 seconds. If you miss your chance to press F6, restart the computer.
4. Insert the driver CD, and then wait until you are prompted to install a driver.
5. Press S to specify that the driver is on the installed medium, then press Enter.     The computer reads the medium.
6. When the driver is found, press Enter.
7. Follow the on-screen instructions to complete the installation.
8. To configure and manage the hard disks, see the Sun StorageTek RAID Manager Software User's Guide at:
http://docs.sun.com/app/docs/prod/stortek.raid.hba#hic


Installing the Driver on an Existing Windows OS
1. Start or restart Windows.
	The Found New Hardware Wizard opens and searches for the driver.
2. Insert the driver CD.
3. Select the source, and click Next.
4. Click Next, and click Next again.
5. Follow the on-screen instructions to complete the driver installation.
6. Remove the driver CD and restart the computer.
7. To configure and manage the hard disks, see the Sun StorageTek RAID Manager Software User's Guide at:	
http://docs.sun.com/app/docs/prod/stortek.raid.hba#hic

============
Known Issues
============
N/A

=============
Fixes/Updates
=============
Version 5.2.0-17757
1 	Snapshot feature should be removed from StorMan GUI and ARCCONF for Linux & Windows
2 	Installation issue with SLES 10 SPE3
3 	ARCCONF shows RAID volumes as not protected by Global Spare (mismatches with GUI)
4 	Adaptec SDK crashes with Win2k8
5 	CAM reports FWR_DEVICE_ERROR,4 or No such Disk when upgrading JBOD Disks via Prometheus HBA. This problem could not be verified at Adaptec due to the lack of CAM software.
6 	When trying to upgrade Drive f/w on a JBOD from Linux host, Prometheus HBA panics and the host hangs. This problem could not be verified at Adaptec due to the lack of CAM software.
7 	WHQL signed drivers updated.

Version 5.2.0-16795
1.	Added - WHQL signature.

Version 5.2.0-15882
1.  	Fixed: SDK failed to update the Drive FW under Windows. The fix is done in both windows driver and SDK. 

Version 5.2.0 - 15847
1.	Fixed: WHQL base qual test for plug and play fails with BLUE SCREEN OF DEATH on 15828
  

*Third-party trademarks are the property of their respective owners.
